AZRM Wheel set for Ferrari 641/2 1:12 Scale
AZMW 12004
updated 09/04/15
Brake sets designed to work with these are to
follow.
These are machined parts to replace the kit parts for
better detail.
They will include in each set:
2 x Rear Outer rims (Anodized Black)
2 x Front Outer rims (Anodized Black)
4 x Inner Rims (Same for front and rear)
4 x Air-valves
The first Images below are "rendered" from my software.
The rest are the actual parts as they come out of the machine shop. You will see everything and how to put them
together in the in the near future. Click the
thumbnails for a larger image
NOTE: If you plan on using Thunder
Valley's brake set with these wheels, you will have to drill out the center of
the front wheel for their wheel nut to fit the rims. The nuts fit in the rears. You should be able to use the
drill supplied by Thunder Valley for this. The boss on the hats is a very loose
fit in the wheels. Once the wheel nut is installed it would center the wheels.
|
|
|
|
|
|
|
|
|
|
|
|
Packaged to go to Anodizing on 8/28/15 (52 sets of wheels) |
|
|
|
|
|
|
|
|
|
|
|
|
|